Product Description And Specifications; Intended Use; Product Features - Bosch GTS 10 XC Professional Manual Original

OBJ_BUCH-1375-005.book Page 32 Friday, March 16, 2018 9:47 AM
32 | English
Symbols and their meaning Wear a dust respirator.
Wear ear protectors. Exposure to noise
can cause hearing loss.
Wear safety goggles.
3 601 M30 401 ø 30 mm
3 601 M30 431
ø 254
3 601 M30 461
mm
3 601 M30 471
3 601 M30 441 ø 25.4 mm
3 601 M30 4B1
ø 254
mm
Observe the dimensions of the saw blade. The hole diameter
must match the tool spindle without play. If it is necessary to
use reducers, ensure that the dimensions of the reducer are
suitable for the base blade thickness and the saw blade hole
diameter, as well as the tool spindle diameter. Wherever
possible, use the reducers provided with the saw blade.
When changing the saw blade, pay attention that the kerf
width is not less than 2.3 mm and the blade body thickness
not greater than 2,3 mm. Otherwise, there is danger that the
riving knife (2.3 mm) becomes wedged in the workpiece.
The maximal possible workpiece height is 79 mm.
Left side
Indicates the position of the locking lever
for locking the saw blade and for adjust-
ing the bevel angle (saw blade tiltable).
Right side
Indicates the rotation direction of the
handwheel for lowering (transport posi-
tion) and raising (working position) the
saw blade.
1 609 92A 467 | (16.3.18)
Symbols and their meaning Turning direction of the knurled screw for
locking/releasing the angle stop on the
sliding table.
Power tools from the protection class II are
strengthened or double-insulated.
CE mark signifies the manufacturer's confirmation
that the power tool conforms to the applicable EU
guidelines.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.

Intended Use

The power tool is intended as a stationary machine for making
straight lengthways and crossways cuts in hard and soft-
wood, as well as in particle and fibre board. In this, mitre an-
gles from –60° to +60° as well as bevel angles from –1° to
+47° are possible.
When using appropriate saw blades, sawing aluminium pro-
files and plastic is also possible.

Product Features

The numbering of the components shown refers to the repre-
sentation of the power tool on the graphic pages.
1 Scale for clearance of the saw blade to the parallel guide
8
2 Sliding table
3 Angle stop
4 Carrying handle
5.1 Blade guard with clamping lever*
5.2 Blade guard with clamping screw and side protector*
6 Vacuum connection on the blade guard
7 Riving knife
8 Parallel guide
9 Guide groove for angle stop
10 Table extension
11 Table width enlargement
If required, open the bot-
tom plate and apply oil to
the lubrication points of
the power tool at the indi-
cated locations.
Bosch Power Tools