Nice OXI Instrucciones Y Advertencias Para La Instalación Y El Uso página 8

The system can be programmed in Mode 1 or in Mode 2: see Paragraphs 3.1 and 3.2.
3.1 - Memorisation in "Mode 1"
While Procedure 1 is being carried out, the receiver memorises all the keys present on the transmitter, auto-
matically assigning output 1 of the receiver to the 1
cedure terminates, the memorisation will occupy a single memory location and the command associated with
each key will depend on the "List of commands" present on the automation's control unit.
PROCEDURE 1 - Mode 1 memorisation
01. On the receiver: hold down key A and wait for the green LED B
to light up. Subsequently, release key A.
02. On the transmitter being memorised:
• (within 10 seconds) on the transmitter: hold down any key and
release it once LED B (on the receiver) emits the 1
flashes (=memorisation completed correctly). (*1)
(*1) Note - If there are other transmitters to be memorised, repeat step 02 within the next 10 seconds
after the first 10. The procedure will terminate automatically once this time elapses.
3.2 - Memorisation in "Mode 2"
While Procedure 2 is being carried out, the receiver memorises a single key among those present on the trans-
mitter, associating it with the receiver output chosen by the installer. To memorise further keys, repeat the pro-
cedure from the beginning for each key to be memorised. Once the procedure terminates, the memorisation
will occupy a single memory location and the command associated with the memorised key will be that chosen
by the installer from the "List of commands" of the automation's control unit. Note - A key can be associated
7 - English
key, output 2 to the 2
st
of 3 green
st
key, and so forth. Once the pro-
nd