Nice OXI Instrucciones Y Advertencias Para La Instalación Y El Uso página 13

02. Hold down key A of the receiver and simultaneously restore the
power supply: LED B first emits the signals relative to the memo-
rised transmitters (Chapter 3) then emits a few short orange
flashes: release key A exactly at the end of the 2
03. Within 5 seconds: repeatedly press and release key A of the
receiver to choose one of the following functions, identifiable by
the status of LED B:
- No lock active = LED OFF
- Locking of the memorisation "near the control unit" = RED LED
- Locking of the memorisation with the "enabling code" = GREEN LED
- Locking of both memorisations ("near the control unit" and with
"enabling code") = ORANGE LED
04. Within 5 seconds: on a transmitter already memorised in the
receiver, press and release a key (memorised) to save the function
that has just been chosen
This function can be performed also using the O-Box / O-View programmers.
orange flash.
nd
> 5 sec <
ON
+
...
> 5 sec <
English - 12
...