Nice OXI Instrucciones Y Advertencias Para La Instalación Y El Uso página 12

02. On the transmitter to be deleted:
• (on the transmitter) hold down the key (*4) to be de-
leted and release it after LED B (on the receiver) has
emitted the 1
completed correctly).
(*4) Note - If the transmitter is memorised in "Mode 1", any key can be pressed. If the transmitter is memo-
rised in "Mode 2", the entire procedure must be repeated for each memorised key that must be deleted.
This operation can also be performed through the O-Box / O-View programmers.
3.7 - Locking (or release) of memorisations carried out with the "near the control unit" procedure
and/or through the "enabling code"
This function prevents the memorisation of new transmitters in the receiver, when using the "near the receiver"
procedure (Paragraph 3.3) or the "enabling code" procedure (Paragraph 3.4). The default setting is ON for both
procedures. To perform the following procedure it is necessary to have a transmitter already memorised in the
receiver.
PROCEDURE 6 - Locking (or release) of memorisations carried out with the "near the control
unit" procedure and/or through the "enabling code"
01. Disconnect the power supply and wait 5 seconds.
11 - English
of 5 quick green flashes (= deletion
st
OFF
5
s