Tabla de contenido
14
12.1
12.2
Using your liner and mattress
Your Pioneer Carrycot
12.1
mattress is removable.
Simply lift it out of the liner.
The mattress cover can be
hand washed. Remove the
foam mattress insert prior to
washing by opening the flap
on the back of the mattress
cover and removing the foam
mattress.
The Pioneer Carrycot has a
12.2
removable liner. Simply unzip
each end and release the
Velcro fastenings to remove it.
To remove the board within
the liner simply unzip from
underneath.
To fit the liner and mattress
see preparation for use (see
7.1
)
- 7.4
WARNING: DO NOT ADD A
MATTRESS OTHER THAN THE
ONE PROVIDED.
CAUTION: Do not force the zip
13.1
13.2
Using your Pioneer as a
pushchair
Your Pioneer seat unit can
be fitted to the chassis in
rearward-facing position
(infant facing you) or
forward-facing position
(infant facing away from
you). Follow (
) to attach the
17.1
seat unit to the chassis.
Attaching the seat unit hood to
the seat unit
First, slide the back of the
13.1
hood over the back of the seat
unit. Locate the slot in the
fabric at the back of the hood
and slide over the seat recline
adjustment lever.
Attach the hood by pressing
13.2
the hood clips onto the slots
on either side of the seat unit
frame. Note your Pioneer
pushchair has a function
where you have the option to
raise or lower the height of
the hood provided. The height
position can be adjusted by
connecting the hood to one
of the two height locations
provided. Velcro the lower
front corners of the hood onto
the seat unit.
silvercrossbaby.com
15
Tabla de contenido
