Tabla de contenido
18
15.1
Preparing the harness
The shoulder straps have 3
15.1
height positions. To adjust,
first lift the flap on the back
of the seat unit. Thread the
harness buckle from the front
of the seat unit through to
the back of the seat unit and
allow the buckle to lay flat
behind the seat securing the
shoulder strap in place.
Thread the harness through
the button hole in the seat
unit relative to the size of your
child, and secure the harness
buckle. (see
).
16.1
WARNING: THE HARNESS CAN
FORM LOOPS WHICH MAY BE
A STRANGULATION HAZARD.
NEVER LEAVE THE HARNESS
CONNECTED WHEN NOT FITTED
TO A CHILD IN THE PUSHCHAIR.
16.1
16.2
16.3
A
A
B
Using the harness
WARNING: ALWAYS USE
THE CROTCH STRAP IN
COMBINATION WITH THE WAIST
AND SHOULDER STRAPS
To fasten the harness insert
16.1
both buckle clips into each
side of the buckle. Listen for
the 'click'.
WARNING: ALWAYS USE THE
RESTRAINT SYSTEM.
To release the harness press
16.2
the button at the centre of
the buckle and pull apart.
The shoulder straps can be
unhooked from the buckle if
required.
Your harness is fully adjustable
16.3
by moving the slides (A), to
make fitting easy. Your child
should always be harnessed
in and should never be left
unattended, even for short
periods of time.
Your Pioneer harness can be
adjusted for the size of your
child.
B
'D' rings are provided for
fitting a separate harness if
required (B).
silvercrossbaby.com
19
Tabla de contenido
