Orp/Chlorine Control; Adjusting Orp Set Point - Davey DPLGEU Manual De Instrucciones

8.2 ORP/CHLORINE CONTROL

In a swimming pool application, control of the water's Chlorine level is essential in order to correctly and
efficiently oxidise pathogens in the water. The Davey Lifeguard's HOME SCREEN (refer Figure 8.28)
shows the current ORP of the pool water, as measured from the Davey Lifeguard's ORP probe.
Figure 8.28
This can also be observed from the dashboard of the Davey Lifeguard app (refer Figure 8.29).

8.2.1. Adjusting ORP set point

The factory default ORP set point is 650mV, however you may wish to change this once the Lifeguard is
installed. It should be noted that Chlorine's effectivity is greatly influenced if pH levels are too high, or too
low. Davey recommends following the pool levels shown in Section 10. Adjustments to ORP set point can
be made as follows.
8.2.1.1. On the Davey Lifeguard control panel
• From the HOME SCREEN, press the
main menu (Figure 8.30);
Figure 8.30
system on 100%
slt 1782 t 19°c
orp 650 ph 7.4
Figure 8.29
menu/setting select button. This will now show the
main:
-> modes
settings
maintenance
38
▲ CONTENTS