Battery Tool Use And Care; Service; Safety Of Others; Specific Safety - SKF A Serie Instrucciones De Uso

Battery tool use and care

• Recharge only with the battery charger
specified by the manufacturer.
A charger that is suitable for one type of
battery pack may create a risk of fire when
used with another battery pack.
Use power tools only with specifically
•
designated battery packs. Use of any
other battery packs may create risk of i
njury and fire.
• When battery pack is not in use, keep
it away from other metal objects, like
paper clips, coins, keys, nails, screws
or other small metal objects, that can
make a connection from one terminal
to another. Shorting the battery termi-
nals together may cause burns or a fire.
• Under abusive conditions, liquid may
be ejected from the battery; avoid
contact. Liquid ejected from battery
may cause irritation or burns. If con-
tact acciden-tally occurs, flush with
water. If liquid contacts eyes, seek
medical help. Liquid ejected from the
battery may cause irritation or burns.

Service

• Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool is
maintained
.

Safety of others

This appliance is not intended for use by per-
sons (including children) with reduced physi-
cal, sensory or mental capabilities, or lack of
experience and knowledge, unless they have
been given supervision or instruction con-
cerning use of the appliance by a person re-
sponsible for their safety.
Children should be supervised to ensure
that they do not play with the appliance.

Specific safety

Use only SKF TLGB 20-3 high pressure hose
900 mm with coupler. Grease injec-
(36 in.)
tion injuries are a very serious injury. Hold
the hose only in the area of the spring guard.
Avoid accidental starting. Be sure switch is
not pressed when inserting battery pack.
Replace the hose at the first sign of wear,
kink or damage to the outside jacket. Do not
bend the hose so that it becomes kinked.
Do not overreach. Keep proper footing
and balance at all times. Proper footing and
balance enable better control of the tool in
unexpected situations.
Use safety equipment. Always wear eye
protection.
Dust mask, non-skid safety shoes, hard
hat or hearing protection must be used for
appropriate conditions.
The gun uses lubricants, that may be
flammable and poisonous if ingested. Do not
use gun near open flame or other fire haz-
ards. Do not use flammable greases with
this grease gun.
Grease is often marketed as high temper-
ature because it must maintain its lubricat-
ing properties in hot areas, but the lubricant
may be flammable if the temperature is too
high. Please read all warnings on lubricants
before using this gun.
Do not use flammable greases with this
grease gun.
4
W A R N I N G
Do not use any hose that has not been
approved by SKF. Extreme pressure may
cause nozzle extension or whip hose to
burst.
Replace hose at first sign of wear,
kinks, or damage to outside jacket.
Follow whip hose instructions and
warnings. Failure to comply may result in
serious injury or death.
D A N G E R
Grease gun can develop high pressure
up to 700 bar psi). Use safety
(10 000
glasses and gloves for protection during
operation. Keep hands clear of exposed
rubber portion of hose.
Failure to comply may result in serious
injury and/or death.

Residual risks

Additional residual risks may arise when us-
ing the tool which may not be included in the
enclosed safety warnings. These risks can
arise from misuse, prolonged use etc.
Even with the application of the relevant
safety regulations and the implementation
of safety devices, certain residual risks can
not be avoided.
These include:
• Injuries caused by touching any rotating/
moving parts.
• Injuries caused when changing any parts,
accessories.
• Injuries caused by prolonged use of a tool.
When using any tool for prolonged peri-
ods ensure you take regular breaks.
• Impairment of hearing.
• Health hazards caused by breathing dust
developed when using your tool (example:
-working with wood, especially oak, beech
and MDF.)