Sony HDVF-L10 Manual De Instrucciones página 22

Reduced display mode
Displays the camera image at a reduced size, with
the TALLY and other indicators displayed in the
spaces above and below the camera image. Use
this mode when the clear visibility of the TALLY
and other indicators is more important.
M
A
G
Indicators are located at the top and bottom of the
LCD screen to indicate the status of the camera
and this unit.
a G TALLY indicator (green)
Lights up when the green tally signal is input.
b R TALLY indicator (red)
Lights up when the red tally signal is input.
c Y TALLY indicator (yellow)
Lights up when the yellow tally signal is input.
Note
In full-screen display mode, the display position of the
TALLY indicators is fixed in one location. Accordingly,
only one R/G/Y tally indicator can be lit at any one time,
regardless of the signal that is input. The display priority
of the tally indicator is red, green, and yellow, in that
order.
d [!] (Attention) indicator (amber)
Lights up when the camera detects certain
conditions. The conditions under which the
indicator lights up are specified on the camera.
For details on how to set up and verify the conditions
under which the [!] indicator lights up, refer to the
manual of the camera in use.
22
Names and Functions of Parts
e BATT (battery) indicator (red)
Lights up or flashes to indicate the status of the
battery attached to the camera.
Lit: The battery is drained.
Flashing: The voltage of the battery has dropped
below the threshold value.
To prevent camera from shutting down, change
the battery as soon as possible after this indicator
begins flashing.
The threshold battery voltage value at which this
indicator begins lighting up or flashing can be set by
M
the camera. For details, refer to the manual for the
A
camera.
G
f SAVE indicator (amber)
Lights when the recorder attached to the camera
is in power save mode.