Disposal - Dometic FreshWell 2000 Instrucciones De Montaje

Dometic FreshWell 2000
Problem Cause
Under-bench air The air filter is obstructed.
conditioner stops
The voltage is too low (under
working.
200 Vw).
The voltage converter is defective.
The defective thermal protection is
defective.
The condenser fan is damaged.
The heat exchange coils are polluted.
The external blower is defective.
Under-bench air One of the temperature sensors is
conditioner does defective.
not switch off.
The electrical fuse of the power sup-
ply is too low.
9

Disposal

Regulations for environmental safety and correct disposal
All organisations must apply a set of procedures to identify, evaluate and
control the influence that their activities (manufacturing, products, services,
etc.) have on the environment.
The procedures to be followed to identify significant environmental impact
must take the following factors into account:
 use of raw materials and natural resources
 atmospheric emissions
 discharge of liquids
 waste management and recycling
 contamination of the soil
In order to minimise environmental impact, the manufacturer provides a
series of indications here below that should be taken into account by all those
who, for whatever reason, interact with the appliance during its working life.
 All packing components must be disposed of (preferably recycled) in com-
pliance with statutory legislation in the country in which disposal takes
place.
 All product components must be disposed of (preferably recycled) in com-
pliance with statutory legislation in the country in which disposal takes
place.
EN
Remedy
➤ Clean the air filter.
➤ Contact an authorised work-
shop.
➤ Contact an authorised work-
shop.
➤ Check the electrical fuse of the
power supply.
Disposal
25