Osd Function Description - Stryker VISION ELECT HDTV 240-030-960 Guia Del Usuario

OSD Function Description

Item
Specialty
Color Temperature *
Red
Green
Blue
Gamma
Setting
Brightness
Contrast
Phase**
Chroma**
Image Sharpness
Video Sharpness**
Image Effect
Scale Mode
Freeze Frame
Zoom/Pan
PIP
POP
PBP
Advanced
OSD Control
Screen Control***
DPMS
Auto Source Select
Restore Factory
Settings
Key lock
Information
User Name Entry
Serial Number
Runtime
Input Format
Actual on-screen display values may vary with updated versions of the firmware and user setting.
* Color Temperature RGB adjustment is available only for Standard, Artho, Lap, Gyn and ENT settings.
* Color temperature selection for PACS and Norm are only available under SOG input.
** Only available under SDI, S, or C video input.
*** Only available under VGA input.
EN-14
Function Description
Chooses between color temperatures for Standard, Artho, Lap, PACS,
ENT, Gyn or Norm.
Red balance
Green balance
Blue balance
Gamma value
Increases or decreases the brightness
Increases or decreases the contrast
Increases or decreases the Phase level
Increases or decreases the Chroma level
Sets image sharpness
Increases or decreases the video sharpness
Chooses scale mode between Fill All, V-Fill, H-Fill, One To One or Fill To
Aspect
Enables or Disables freeze frame
Enables zoom-in and pan function
Enables PIP (Picture In Picture) function
Enables POP (Picture On Picture) function
Enables PBP (Picture By Picture) function
Controls OSD Menu Position, Background, and Timeout
Controls and adjust Horizontal, Vertical, Frequency, Phase
Chooses DPMS (Display Power Management
Signaling)
Adjusts Auto Source Select between on and off
Sets to factory default
Sets to Key lock mode
Enters custom username display for boot-up display
Displays monitor serial number
Displays current run time of monitor
Displays current input format
Range
-128 to 128
-128 to 128
-128 to 128
0.1 to 2.5, S0,
S1, S2
0-100
0-100
0-100
0-100
1-10
0-100
ON, OFF, 30min,
60min, 90min,
120min