Installation - Blaupunkt 5CG 22010 Manual De Montaje Y Modo De Empleo

Page 53 Start-up

Installation

NOTE
Risk of damage! The improper
handling of the refrigerator may
cause damage.
The refrigerator
■
installed by
otherwise the
becomes void.
Assembly materials (included with
delivery)
No. Designation
(a) Elbows
(b) Door drivers
(c) Cover strips, long
(d) Cover strips, short
(e) Screws
(f) Joint profile
1. Remove the glass shelves (8) and (9),
vegetable drawers (7) and door shelves
(4) to (6) from the refrigerator.
2. Plug the power plug into a properly
installed socket.
3. Insert the refrigerator in the built-in
cabinet. The front of the refrigerator
must be flush with the
must be
a specialist,
warranty
(a)
(b)
(c)
(d)
(e)
(f)
Quantit
y
2
2
2
2
12
1
lower edge of the built-in cabinet.
To ensure that the joint profile can be
stuck in, a distance of 4 mm between the
refrigerator and the cabinet wall must be
adhered to over the entire height on the
opposite side.
4. Use the screws (e) to screw the
refrigerator to the built-in cabinet.
5. Open the refrigerator door and screw the
elbows (a) to the refrigerator door using
the screws (e).