Start-Up; Transportation And Unpacking; Selecting A Suitable Location - Blaupunkt 5CG 24010 Manual De Montaje Y Modo De Empleo

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 164
Page 47

Start-up

Start-up

Transportation and unpacking

WARNING
Risk of suffocation!
Do not allow children to play with
the packaging film. They may get
entangled or suffocate.
Prevent children from pulling out
small parts from the appliance or
the accessory bag and inserting
them in the mouth.
CAUTION
Risk of injury!
The improper handling of the
appliance may cause injury.
The appliance is heavy and
unwieldy. During transport and
installation, get the help of
another person.
Do not use the base, drawers,
doors etc. as a step or support.
NOTE
Risk of damage! The improper handling
of the appliance may cause damage.
Wherever possible, do not tilt the
refrigerator into a horizontal position.
After transporting the refrigerator,
allow it to stand upright for 2 hours.
Do not use any sharp or pointed
objects to unpack the appliance.
• Use a trolley or seek the assistance of a
second person when transporting the
appliance.
• Unpack the appliance and carefully
remove all packaging parts, plastic
profiles, adhesive strips, protective film
and foam padding on the inside,
outside and on the back of the
appliance.

Selecting a suitable location

CAUTION
Risks from refrigerants!
Do not damage the refrigerant
circuit, e.g. by piercing the
refrigerant channels of the
evaporator with sharp objects,
bending pipes, etc.
Escaping refrigerant is
flammable and can cause eye
damage. In this case, flush the
eyes with cold water and consult
a physician immediately.
NOTE
Risk of damage!
The appliance may not function
properly if it is exposed to an
excessively
low
temperature for a long period. This
may result
in
increase in the interior.
Ensure that the prescribed
ambient temperature is complied
with (see "Climate class" on
page 55).
To prevent an ignitable gas/air mixture in the
event of a leak of the refrigerant circuit, the
installation room must have a minimum size
of 1 m³ per 8 g of refrigerant according to
DIN standard EN 378. For this appliance,
this results in a minimum room size of
3.5 m³.
– Suitable locations are dry, well ventilated
and, if possible, cool rooms.
– Unsuitable locations are those situated
directly in the sunlight or immediately next
to a stove, oven or heater.
ambient
a temperature
Tabla de contenido
loading

Este manual también es adecuado para:

5ck 24010

Tabla de contenido