Blaupunkt 5CG 24010 Manual De Montaje Y Modo De Empleo página 49

Page 49
Start-up
10. Insert the upper hinge on the side of
the door hinge and screw it tight.
11. Screw the metal strip back onto the
refrigerator.
12. Check whether the door seal has good
contact (see "Inspecting and cleaning
the door seals" on page 34).
Changing the door hinge
of the freezer
compartment door
4.
(14)
1. Unscrew the hinge screw (16) below the
freezer compartment (14). To do this,
use a Phillips screwdriver.
2. Open the door of the freezer
compartment and remove the door
and the hinge.
3. Take the hinge out of the door pin.
5. Rotate the door latch by 180° and attach
6. Press the two covers back into the
(16)
7. To insert the freezer compartment door
8. Insert the door in the opening at the
9. Insert the hinge on the lower door pin
(17)
With the screws (17), remove the
covers from the door latch and unscrew
the two screws.
it to the opposite side. Use the screws
(17) for this purpose.
door latch.
on the new side, rotate it by 180°.
top of the freezer compartment using
the upper door pin.
(16)
and screw it to the refrigerator using the
hinge screw (16).