Siemens SITRANS L 260 Manual De Inicio Rápido página 12

Handheld Programmer
(Ordered separately:
Part No. 7ML1930-2AJ)
C
Accessing parameters via the handheld programmer
: SITRANS LR260 automatically returns to Measurement mode after a period of
Note
inactivity in PROGRAM mode (between 15 seconds and 30 minutes, depending on the menu
level).
Parameter menus
Parameters are identified by name and organized into function groups, then arranged in a 5-
level menu structure. For the complete list of parameters with instructions, see the full manual.
In Navigation mode
Note:
ARROW keys move to the
next menu item in the
direction of the arrow.
Page EN-10 SITRANS LR260 (PROFIBUS PA) – QUICK START MANUAL
Measurement
Key
Mode Function
Updates internal
enclosure temper-
ature reading.
Updates echo
confidence value.
Updates distance
measurement.
Mode opens
PROGRAM mode–
Right ARROW
opens PROGRAM
mode–
Up or Down
ARROW
toggles between
linear units and %
Result
New value is displayed in LCD
secondary region.
New value is displayed in LCD
secondary region.
New value is displayed in LCD
secondary region.
–at the menu level last displayed
in this power cycle.
– at top level menu if power has
been cycled since exiting PRO-
GRAM mode, or more than 30 min-
utes have elapsed.
–at top level menu.
LCD displays measured value in
either linear units or percent.
1. QUICK START
2. SETUP
2.1. DEVICE
2.2. INPUT
2.2.1. SENSOR CALIB.
2.2.1. ECHO PROC.
A5E32114443