Intended Use; Other Risks; Scope Of Delivery - Scheppach wox d 700 Traducción De La Instrucción De Original

Intended use

• The firewood circular saw and the supplied tool is exclusively constructed for the processing of wood.
• The machine complies with the valid EG Machines regulation
• The machine has only been constructed for one-shift operation. Duty cycle S 6 - 40%.
• The saw is exclusively constructed for transverse cutting of firewood of max. 1 m length.
• Independent of the wood diameter only one piece may be laid onto the rocker.
• Take notice of all safety and risk information of the machine.
• Keep all safety and risk information of the machine completely in readable condition.
• Upon usage in closed rooms the machine should be connected to an exhaust installation.
• Use the machine only in technical impeccable condition as well as according to its intended use, and in a safety - and
danger conscious manner with observance of the operational constructions! Immediately eliminate, or have eliminated,
in
particular those disorders that can harm safety!
• The safety, work and maintenance regulations of the producer as well as the measurments mentioned in the "Technical
information" must be abided by.
• Attention must be paid to the applicable prevention of accidents rules and to the other, generally accepted safety-rela-
ted
rules.
• The machine should only be used, maintained or repaired by people who are familiar with it and informed about the
risks.
Arbitrary changes to the machine exclude liability of the manufacturer.
• The machine should only be used with original accessories, original extension tools and original saw blades of the
manuf
acturer.
• Every use surpassing this counts as non-intended use. In this case the manufacturer is not liable for damages caused;
therefore the user only bears the consequences.

Other risks

The machine is built according to the up to date technical level and the accepted safety-related rules. However, some
remaining risks might occur during work.
•Risk of injury for fingers and hands by the rotating saw blade in case of incorrect usage of the workpiece.
•Risk of health because of wood dust or wood splinters. Wear personal protection gear such as eye protection and dusk
mask without fail.
• Risk of health because of noise. During operation the allowable noise level is exceeded.
•Electricity danger, in case electrical connections not according to the rules are used.
•Furthermore, despite of all precautions unapparent remaining risks can exist.
•Remaining risks can be minimized, when the "Safety information" and the "Intended use" as well as the operational
instructions altogether are respected.
Attention: risk of accident!
The wood must always be seated on both sides of the saw blade on the v-block of the rocker. (see arrows)

Scope of delivery

Rocker circular saw
Female six fold wrench or open-end wrench
Locking pin
Operational instructions
Seite:51