B R Id Ge Elem En T - Wolf IR365PESPH Installation Guide

SU R FA C E O P E RAT I O N
Surface Operation
B O O S T MO DE
Boost mode boosts power on one element by diverting
power from an adjacent element. If the adjacent element is
on high, the power output will be reduced. The reduction in
power will be displayed on the power level indicator of the
adjacent element. Refer to the illustration below.
illuminate when an element is in boost mode.
Boost mode will deactivate automatically after approxi-
mately 15 minutes of continuous operation and can be
reactivated if desired.
BOOST
Boost mode.
|
18 Wolf Customer Care 800.222.7820

B R ID GE ELEM EN T

Setting controls:
To activate bridge, select desired power level on one of
1
the single elements.
Touch BRIDGE between corresponding element con-
will 2
trols to bridge elements front to back, BRG to bridge
elements side to side, or ALL BRIDGE to bridge all
elements.
To change power level, adjust the power level on any
3
active bridged element.
To turn off, touch ON/OFF on any active bridged
4
element.
ALL BRIDGE should be used for cookware larger than
12" in diameter. For smaller cookware, use the right
(305)
rear element.
GR ID D L E U SE
The bridge element provides an oblong heating area for use
with a griddle, open roaster or fish poacher.
To preheat a griddle, set the bridge element power level to
high for five minutes, then reduce for cooking.
CAUTION
A griddle, open roaster or fish poacher should not be
used when the bridge element is off or with any other
combination of heating elements.
, or will illuminate respectively.