Introduction; Equipment; Technical Data - ESAB MiniArc 161 LTS Manual De Instrucciones

US
4

INTRODUCTION

MiniArc 161 welding power source is intended for use with coated electrodes
(SMAW welding) and L-GTAW welding (Lift-Tig).
ESAB's accessories for the product can be found on page 51.
4.1

Equipment

The power source is supplied with:
S 3 meter welding cable with electrode holder
S 3 meter return cable with return clamp
S instruction manual.
5

TECHNICAL DATA

Mains voltage
Primary current I SMAW
max
Primary current I L-GTAW
max
Setting range SMAW
Setting range L-GTAW
Permissible load at SMAW
35% duty cycle
100 % duty cycle
Permissible load at L-GTAW
35% duty cycle
100 % duty cycle
Power factor at maximum
current
Efficiency at maximum current
Open-circuit voltage U
SMAW
Open-circuit voltage U
L-GTAW
Operating temperature
Transportation temperature
Sound pressure at no-load
Dimensions lxwxh
Weight
Enclosure class
Duty cycle
The duty cycle refers to the time as a percentage of a ten-minute period that you can weld at a cer­
tain load without overloading. The duty cycle is valid for 104° F.
Enclosure class
The IP code indicates the enclosure class, i.e. the degree of protection against penetration by solid
objects and water. Equipment marked IP 23S is designed for indoor and outdoor use; however,
should not be operated in rain or similar.
bh43a
115 V 1∼ $15%, 50/60 Hz
32.5 A
22.5 A
5 A / 20.2 V - 110 A / 24.4 V
5 A / 10.2 V - 110 A / 14.4 V
110 A / 24.4 V
60 A / 22.4 V
110 A / 14.4 V
60 A / 12.4 V
0.73
>80 %
80 V
0
15 V
0
-10 to +40° C
-20 to +55° C
<70 db (A)
5.8 x 15.8 x 10.1 inch
17.6 Ibs
IP 23S
- 10 -
MiniArc 161
230 V 1∼ $15%, 50/60 Hz
28.5 A
18.5 A
5 A / 20.2 V - 160 A / 26.4 V
5 A / 10.2 V - 160 A / 16.4 V
160 A / 26.4 V
88 A / 23.5 V
160 A / 16.4 V
88 A / 13.5 V
0.73
>80 %
80 V
15 V
-10 to +40° C
-20 to +55° C
<70 db (A)
5.8 x 15.8 x 10.1 inch
17.6 Ibs
IP 23S
© ESAB AB 2012