Tabla de contenido
US
7.3
Symbols and Control panels
7.4
Overheating protection
The welding power source has a thermal overload trip which operates if the
temperature becomes too high, interrupting the welding current and lighting a yellow
indicating lamp on the front of the power source. The thermal overload trip resets
automatically when the temperature has fallen.
7.5
SMAW welding
Move process selector switch to desired welding process.
NOTE: Power source output is enabled.
Check welding cable polarity selection matches electrode requirements. Select
desired welding current level.
7.5.1
Welding current setting
The power source has an adjustable range from 5 to 160 Amps.
(230V input supply) and 5-110 Amps. (115V input supply).
bh43a
Power ON
Power OFF
- 13 -
Overheating
Indicating lamp,
orange, overheating
© ESAB AB 2012
Capítulos
Tabla de contenido
