Temperature - Warm-Up Mode - Kohler K-527 Guia Del Usuario

Press and hold both icons
for 2 seconds.
+
Temperature – Warm-up Mode
When enabled, the shower will turn on and water will flow until the set temperature (default) is reached.
Factory default for this setting is warm-up mode disabled (n).
NOTE: The displayed temperature is the set temperature. The temperature displayed will blink until the
actual temperature reaches the set temperature.
Once the set temperature is reached the shower will automatically pause until the user presses the [Power
Icon] to resume showering. If the shower is not resumed within 2 minutes, the system will automatically
turn off.
Press and hold the [Power Icon] and the [Up Icon] to enter the settings menu. If your shower is on,
the water will be shut off.
Use the [Up Icon] or [Down Icon], to step to the "Prog 10" screen. Press the [Power Icon].
Use the [Up Icon] or [Down Icon] to choose "y" to enable warm-up mode for the default outlet, "b"
for both outlets, or "n" to disable. Press the [Power Icon] to set.
Press the [Power Icon] again to return to the settings menu.
Continue Set-up: Use the [Up Icon] or [Down Icon], to choose the next desired setting; press the
[Power Icon] to select. See the section for the chosen setting.
To Exit the Settings Menu: Use the [Up Icon] or [Down Icon], to step to the "Prog En" screen and
press the [Power Icon]. The system will go into standby mode.
Kohler Co.
Enable default outlet (y), both outlets (b),
or disable (n).
17 1144502-5-D