Timed Shower / Bath Fill - Set Duration - Kohler K-527 Guia Del Usuario

Press and hold both icons
for 2 seconds.
+
Timed Shower / Bath Fill – Set Duration
This setting sets the time duration allotted for showering/bath fill. The time duration defaults to 8 minutes
(8:00); duration can be set in whole-minute increments between 4 and 12 minutes (4:00 and 12:00).
When enabled, a countdown timer will begin counting down at system start-up and the system will
automatically turn off after the set duration. Time will be displayed in minutes:seconds format.
Timed showering/bath fill must be enabled within the "Prog 3" screens.
IMPORTANT! Before setting timed fill for a bath filler, time how long it takes to fill your bath to the
desired depth; take into consideration the water that will be displaced by your body. Start timing at
system start-up then adjust the temperature as desired.
Press and hold the [Power Icon] and the [Up Icon] to enter the settings menu. If your shower is on,
the water will be shut off.
Use the [Up Icon] or [Down Icon], to step to the "Prog 4" screen. Press the [Power Icon].
Use the [Up Icon] or [Down Icon] to set the time as desired. Press the [Power Icon] to set.
Press the [Power Icon] again to return to the settings menu.
Continue Set-up: Use the [Up Icon] or [Down Icon], to choose the next desired setting; press the
[Power Icon] to select. See the section for the chosen setting.
To Exit the Settings Menu: Use the [Up Icon] or [Down Icon], to step to the "Prog En" screen and
press the [Power Icon]. The system will go into standby mode.
Kohler Co.
Set the minutes for the
countdown timer.
11 1144502-5-D