Temperature - Set Unit Of Measure - Kohler K-527 Guia Del Usuario

Press and hold both icons
for 2 seconds.
+
Temperature – Set Unit of Measure
This setting allows you to choose to display temperature in degrees Fahrenheit or degrees Celsius.
Factory default for this setting is degrees Fahrenheit (°F).
Press and hold the [Power Icon] and the [Up Icon] to enter the settings menu. If your shower is on,
the water will be shut off.
Use the [Up Icon] or [Down Icon], to step to the "Prog 5" screen. Press the [Power Icon].
Use the [Up Icon] or [Down Icon] to select either °F or °C. Press the [Power Icon] to set.
Press the [Power Icon] again to return to the settings menu.
Continue Set-up: Use the [Up Icon] or [Down Icon], to choose the next desired setting; press the
[Power Icon] to select. See the section for the chosen setting.
To Exit the Settings Menu: Use the [Up Icon] or [Down Icon], to step to the "Prog En" screen and
press the [Power Icon]. The system will go into standby mode.
1144502-5-D
Choose Fahrenheit or Celcius.
12 Kohler Co.