Tabla de contenido
Release the
Should the boiler be equipped with an outdoor sensor, the values being displayed and set are outdoor
temperature and heating water temperature.
G STANDARD ROOM TEMPERATURE
Sets the standard Manual temperature in either the Heating or Hot water/Heating modes.
Press the – or + keys to set the temperature as desired: the display shows the presently set temperature.
Five (5) seconds after the end of the setting procedure the data is automatically memorised and the display
reverts back to the clock.
G COMFORT ROOM TEMPERATURE
This temperature may be set with either the Heating or Hot water/Heating function enabled.
To set press the
Now hold the
Release the
G LOW ROOM TEMPERATURE
This temperature may be set with either the Hot water/Heating or Heating function enabled.
To set press the
Now hold the
Release the
VIEWING MAIN BOILER PARAMETERS
Press the
key repeatedly to view the main boiler parameters (illustrated below) in sequence.
Displayed parameters:
-
effective heating water temperature (flashing
-
effective hot water temperature (flashing
-
room temperature setting according to present value (flashing
-
outdoor temperature (flashing
If there is no outdoor sensor the display shows "-:-".
-
system water pressure (flashing
If there is no water pressure indicator the display shows "-:-".
key to memorise the new setting.
key: the presently set temperature will appear on the display.
key down and press the – or + keys to modify the temperature setting as desired.
key to memorise the new setting.
key: the presently set temperature will appear on the display.
key down and press the – or + keys to modify the temperature setting as desired.
key to memorise the new setting.
symbol).
symbol)
symbol)
symbol)
symbol)
23
Capítulos
Tabla de contenido
