Re-Establishing Factory Settings And Control Reset; Error Messages - Lamborghini Caloreclima thin 24 MCS W TOP U Manual Para La Instalación Y El Mantenimiento

The appearance of the

RE-ESTABLISHING FACTORY SETTINGS AND CONTROL RESET

You may wish to re-establish the settings made at the factory: to do so press the
the message "Fab" will appear on the display.
Going through this procedure resets the following parameters:
- standard temperature
- comfort temperature:
- low temperature:
- standard timer programme
Pressing key R cancels all user-set data.
In this case it will be necessary to reset all the parameters starting from section 1.

ERROR MESSAGES

In the event of a boiler malfunction the control unit governs the warning signals and is used to reset normal
operation.
Warnings take the form of a code letter and a number (E XX) followed by the
displayed constantly where the anomaly can be reset and flashes when it cannot.
To reset a resettable anomaly and restore normal boiler operation press key A.
MESSAGE DISPLAYS
Code
Code
Code
Code
Code
symbol on the display shows that the user has requested Hot Water or Heating.
20°C
20°C
17°C
THERMOSTAT LIMIT (IF ANY)
E02
NO WATER
E04
HEATING SENSOR
E05
E06 DOMESTIC HOT WATER SENSOR
E14 IGNITION FAULT
24
key for 10 seconds and
symbol. This symbol is