Automatic" Temperature Control Mode - Lamborghini Caloreclima thin 24 MCS W TOP U Manual Para La Instalación Y El Mantenimiento

"AUTOMATIC" TEMPERATURE CONTROL MODE

The control unit has a daily/weekly timer that automatically adjusts room temperature to "comfort" or "low
temperature" values over a 24 hour period, with independent settings for each of the seven days.
To enable automatic operation press the
Hourly programming of temperature values is only permitted with the Heating or Hot water/Heating functions
enabled.
G HOURLY PROGRAMMING OF TEMPERATURE VALUES
Press key V to select the desired day on the
The display will then show the programme graph for the selected day by displaying the "indicator lights"
next to the "comfort" level.
To modify these settings press P within 5 seconds.
The time "00:00" will now appear on the display and the indicator light corresponding to that time will
begin to flash.
Press the + and – keys to increase or decrease the time in 30-minute steps.
The and
level and low temperature level)
Select the desired value by acting on the
ture level) keys. The indicator light will take on the desired value and programming will advance by one
step: the next indicator light to be programmed will then flash.
Once programming is over press P to memorise settings or V to cancel the modifications.
The timer can memorise up to 48 daily temperature value changes.
G COPYING HOURLY PROGRAMMING
To speed up programming, you can "paste" the settings for a specific day onto another day.
Press V to select the day from which you wish to copy the settings.
Press the Copy key within 5 seconds to copy and then press the + and – keys to select the page onto which
you intend to "paste" them (the "destination" day is indicated by a flashing
Press P to paste and memorise the settings or V to cancel.
G TEMPORARY TEMPERATURE VARIATION
It is possible to vary set room temperature during automatic temperature control mode by acting on the +
and – keys. Variations will be shown on the display.
When this function is used the symbol indicating the present level goes out and the indicator light corresponding
to the relevant time slot starts flashing.
The new temperature will remain operative until the next value change, after which the programme will revert
to normal settings.
key and the
symbols show the present value of the indicator light (
symbol will be displayed.
indicators.
(comfort temperature level) and
21
comfort temperature
(low tempera-
indicator).