Schumacher Electric SE-1555A Manual Del Usuario página 10

All manuals and user guides at all-guides.com
9.2 Axle Assembly:
Hold axle upright on floor or work surface. Then, using a hammer, tap one
of the axle caps onto the top end of the axle. Be sure to tap the hub on
straight. Slide both wheels onto the axle with the hubs facing inward. Tap
the other axle cap onto the opposite end of the axle and place the axle
assembly onto the bottom of the charger.
9.3 Axle Assembly:
Place the charger on its side. Place one end of each bracket into slot,
then place the axle assembly under each bracket. Fasten the other side of
each bracket using the two, 10-32 thread cutting screws provided.
9.4 Handle:
Turn the charger right side up onto its foot and wheels. Verify grip and
handle clamp rod are installed on the handle. Remove the two top screws
from each side of the charger. Align the handle so the screw holes are
aligned with the screw holes on each side of the wheel charger. Attach
handle using the same screws.
8
• •