Battery; Chapter 4 Operation; Opening The Package And Checking; Installing Battery - EDAN INSTRUMENTS SONOTRAX Serie Manual Del Usuario

SONOTRAX Series Ultrasonic Pocket Doppler User Manual

3.6 Battery

Power of the SONOTRAX Lite, SONOTRAX Basic, SONOTRAX Basic A and
SONOTRAX Pro Doppler comes from a 9V alkaline battery (IEC Type No. 6LR61/6LF22 or
equivalent).
Power of the SONOTRAX II and SONOTRAX II Pro Doppler comes from a lithium-ion
polymer battery supplied by EDAN.
- 12 -
SONOTRAX Series Ultrasonic Pocket Doppler User Manual

Chapter 4 Operation

NOTE: To ensure that the Doppler would work properly, please read this chapter and
Chapter 1 Safety Guidance before operating; follow the steps when
connecting all the components.

4.1 Opening the Package and Checking

Open the package; take out the Doppler and accessories carefully. Keep the package for
possible future transportation or storage. Check the components according to the packing list.
Z Check for any mechanical damage.
Z Check all the cables and accessories.
If there is any problem, contact us or your local distributor immediately.

4.2 Installing Battery

1. Open the battery compartment.
Turn the rear panel up. Press the top stripe symbols of the compartment cover hard with
one thumb. Meanwhile slide the cover out along the direction of arrowhead with the other
thumb (figure 4-1).
Figure 4-1 Remove the compartment cover
2. Place the battery.
For SONOTRAX Lite, SONOTRAX Basic, SONOTRAX Basic A and SONOTRAX Pro
Doppler, there is a battery connector that has been inserted to the battery socket in the
compartment. Take out a new battery and connect the battery to the connector; put the
assembly back into the compartment with the connector inward.
Battery socket
Battery connector
- 13 -