Play Sound Files; Burn Cd Or Send In Email; Record Troubleshooting - EDAN INSTRUMENTS SONOTRAX Serie Manual Del Usuario

SONOTRAX Series Ultrasonic Pocket Doppler User Manual

4.8.2 Play Sound Files

The recorded sounds are saved as a waveform (.wav) file in your computer.
You can play the waveform file in Sound Recorder. Startup the Sound Recorder, click "File"
→ "Open", search for the folder and select the file, click Open to load the file, click Play
.
If you have any other program that supports waveform (.wav) files installed on your PC,
double click the file to play it.

4.8.3 Burn CD or Send in Email

The waveform files saved in your PC are normal audio data files. You can burn them into
CDs or e-mail to whomever you want.

4.8.4 Record Troubleshooting

If there is audio output from the speaker or earphone, but when recording starts, no sound is
input. (The green line recording area has no waveform.) The reason could be:
1. The plug of audio cable is not well connected to the Doppler or the PC socket.
Re-connect the cable if this condition is detected.
2. The plug of audio cable has been inserted to the wrong socket of the PC, instead of the
audio input socket or the microphone socket.
Insert the plug to the right socket if this condition is detected.
3. The Line in or microphone is muted on PC.
If this condition is detected, change the setting of the PC in these steps:
a) Double click the volume symbol on the right bottom corner;
b) The Volume Control menu pops up:
- 20 -
SONOTRAX Series Ultrasonic Pocket Doppler User Manual
Figure 4-11 Volume Control
c) If the Line In or microphone volume control is not shown in the Volume Control menu,
click "Options" → "Properties", tick the Line In and Microphone as shown in figure
4-12, click OK:
Figure 4-12 Properties
- 21 -