Shut Down The Doppler; Replacing Or Charging The Battery; Chapter 5 Product Specifications - EDAN INSTRUMENTS SONOTRAX Serie Manual Del Usuario

SONOTRAX Series Ultrasonic Pocket Doppler User Manual

4.10 Shut down the Doppler

When the monitor is finished, wipe off the remaining gel off the probe with a clean soft cloth,
then put the probe back into the probe frame.
Press the POWER button on the SONOTRAX Lite again to shut it down.
If there is no signal input or no operation done to SONOTRAX Basic, SONOTRAX Basic A,
SONOTRAX Pro, SONOTRAX II and SONOTRAX II Pro for 60 seconds, it will
automatically shut down. Or the users can press and hold the POWER button for 3 seconds to
shut it down manually.

4.11 Replacing or charging the battery

When the Doppler gives out alarm indicating the battery power is low, you have to shut down
the Doppler to replace or charge the battery.
For SONOTRAX Lite, SONOTRAX Basic, SONOTRAX Basic A and SONOTRAX Pro
Doppler, follow the reverse order of installing a battery described in section 4.2 to replace the
battery.
For SONOTRAX II and SONOTRAX II Pro Doppler, charge their lithium-ion polymer
battery in the machine by inserting the DC plug of the special charger supplied by EDAN in
to the charge socket on the Doppler and connecting the AC plug of it to the a.c.110-240V,
50/60 Hz power supply.
It takes about 4 hours to fully charge the battery. When charging, the LED of the charger is
orange; when the battery is fully charged, the LED turns to green.
CAUTION : Make sure the Doppler is shutdown before charging the battery or
opening the battery compartment.
CAUTION : Only charge the lithium-ion polymer batter of SONOTRAX II and
SONOTRAX II Pro in the machine. Do not use the Doppler for
monitoring until the charger is disconnected with the Doppler.
- 24 -
SONOTRAX Series Ultrasonic Pocket Doppler User Manual

Chapter 5 Product Specifications

Product Name: Ultrasonic Pocket Doppler
Model No.: SONOTRAX Lite, SONOTRAX Basic, SONOTRAX Basic A, SONOTRAX Pro,
SONOTRAX II, SONOTRAX II Pro
Safety:
Complies with: EN 60601-1/1990
Classification:
Anti-electric Shock Type: Internally powered equipment
Anti-electric Shock Degree: Type B equipment
Degree of Protection against Harmful Ingress of Water:
Main Unit: Non-protected
2.0MHz Waterproof Probe, 3.0MHz Waterproof Probe, 4.0MHz Waterproof Vascular
Probe, 8.0MHz Waterproof Vascular Probe: IPX8 Water Ingress Protection Code, which
indicates this probe can work continuously for 5 hours when being immersed into water
within 1 meter depth.
Degree of Safety in Presence of Flammable Gases: Equipment not suitable for use in
Working System: Continuous running equipment
EMC: Group I Class B
Physical Characteristic:
Size: 32 (Depth) x 85 (Width) x 138 (Height) mm
Weight: 290±5g (including a battery and a probe)
Environment:
Temperature: +5°C ∼ +40°C
Working:
Humidity: ≤80%
Atmospheric Pressure: 860hPa ∼ 1060hPa
Temperature: -10°C ∼ + 55°C
Transport and Storage:
Humidity: ≤93%
Atmospheric Pressure: 860hPa ∼1060hPa
Display: 45*25mm LCD display
FHR Performance:
FHR Measuring Range: 50bpm ~ 210bpm
Resolution: 1bpm
Accuracy: ±3bpm
presence of flammable gases
- 25 -