Additional Information; Understanding Built-In Cd Player Error Messages; Cd Player And Care; Cd-R/Cd-Rw Discs - Pioneer SuperTunerIIID DEH-P4770MP Manual Del Usuario

Additional Information

Understanding built-in CD
player error messages
When you contact your dealer or your nearest
Pioneer Service Center, be sure to record the
error message.
Message Cause
ERROR-11, 12, Dirty disc
17, 30
ERROR-11, 12, Scratched disc
17, 30
ERROR-15 The inserted disc
does not contain
any data
ERROR-10, 11, Electrical or me-
12, 15, 17, 30, chanical
A0
ERROR-22, 23 The CD format
cannot be played
back
ERROR-44 All tracks are
skip tracks
HEAT CD player over-
heated

CD player and care

! Use only CDs that have either of the two
Compact Disc Digital Audio marks as
shown below.
All manuals and user guides at all-guides.com
! Use only normal, round CDs. If you insert ir-
Action
! Check all CDs for cracks, scratches or
Clean disc.
Replace disc.
! Avoid touching the recorded (non-printed)
Replace disc.
! Store discs in their cases when not in use.
! Keep discs out of direct sunlight and do
Turn the ignition
ON and OFF, or
switch to a differ-
! Do not attach labels, write on or apply che-
ent source, then
back to the CD
! To clean a CD, wipe the disc with a soft
player.
Replace disc.
Replace disc.
Turn off the CD
player until the CD
player cools down.
! If the heater is used in cold weather, moist-
! Road shocks may interrupt CD playback.

CD-R/CD-RW discs

! When CD-R/CD-RW discs are used, play-
regular, non-round, shaped CDs they may
jam in the CD player or not play properly.
warping before playing. CDs that have
cracks, scratches or are warped may not
play properly. Do not use such discs.
surface when handling the disc.
not expose the discs to high temperatures.
micals to the surface of the discs.
cloth outward from the center.
ure may form on components inside the
CD player. Condensation may cause the CD
player to malfunction. If you think that con-
densation is a problem turn off the CD
player for an hour or so to allow it to dry
out and wipe any damp discs with a soft
cloth to remove the moisture.
back is possible only for discs which have
been finalized.
Appendix
37
En