Foster 4000 Manual De Instrucciones página 28

INSTALLER INSTRUCTIONS
The distance of the cooker hob
from the back edge must be at least
50 mm;
The distance of the cooker hob from
the walls that exceed worktop height
must be at least 100 mm;
Should a hood be installed above
the hob, see the hood assembly
instructions which provide the
correct distance to be respected.
Carefully position the supplied in-
sulating gasket along the external
perimeter of the hole created on the
worktop, trying to make it adhere
along the entire surface by slightly
pressing it by hand [
Once these operations have been
completed, use the supplied brack-
ets to fasten the hob to the structure.
Refer to the "Fastening the cook-
er hob to the cabinet" paragraph
[
6.2 Installation on the support structure (worktop) of a flush built-in cooker
hob (flush-mount edge)
This type of appliance requires milling on the 1.5 mm deep worktop,
which measurements are indicated in the top drawing, identifiable in the section
Gas cooker hobs summary - models with "flush" built-in
The step is necessary to house the cooker hub edge so that it is "flush" with the
worktop.
26
].
Fig. 4
].
Page 27
Fig. 3: cooker hob distances
Fig. 4: positioning the insulating gasket
100
[ ].
Page 213