S8 Adapters - ResMed S8 Elite Manual Clínico

338210r3 Eng.book Page 41 Monday, July 11, 2005 1:28 PM
updated your settings, this message is not displayed.
4. Remove the Data Card from the device.
This information is also supplied in the patient's User's Manual.
When you create a Data Card with therapy settings you can store the serial number
of the device on the Data Card. This prevents the settings from being applied to the
wrong device. Refer to your PC application manual for more details.
Compliance and efficacy data are always stored in the
or damaged in transit, data stored in the S8 device can be recopied onto a Data Card.
WARNING
!
Advise the patient to contact you immediately if they are using the Data Card to
update the settings on their device and the "Settings Success" message does not
appear.
A
NALYZING THE
Use a ResMed PC application to transfer data and settings between an
Data Card and your personal computer. Refer to the user guide for your PC
application for more information about analyzing the information on returned Data
Cards.
S8 A
DAPTERS
S8 adapters are designed for use with the ResMed S8 series of devices, to transfer data
between the device and a personal computer.
Two adapters are available:
Serial adapter, which uses a standard serial cable
•
USB adapter (supplied with a USB cable).
•
WARNING
!
Only use S8 adapters as specified in this manual.
•
S8 adapters are specifically designed for use with ResMed S8 devices.
•
Attach the S8 serial or USB adapter to a ResMed S8 device to create a serial or USB
port. You can then connect a cable that enables transfer of data between the device
and a personal computer.
CAUTION
!
If a cable is not attached when an S8 adapter is attached to an S8 device, either
attach the adapter's protective cover, or remove the adapter and replace it with a
blank or Data Card module. This is to prevent damage to the S8 adapter.
A
TTACHING AN
Notes:
a. Ensure that a module or an adapter is attached to the S8 device at all times.
b. Remove the existing module from the S8 device if a serial or USB adapter is required.
c. The device should be turned off when removing a module and attaching an adapter.
D C
ATA ARD
S8
ADAPTER
. If a Data Card is lost
S8 E
LITE
S8 E
LITE
S8 D M P
ATA ANAGEMENT RODUCTS
or a
41