Maintenance; Maintenance Schedule - DeWalt DXGST227BC Manuel Del Operador

• To direct clippings away from the operator, cut from left to right whenever possible.
• Always release the throttle control and allow the unit to idle when not cutting.
• When finished, always unsnap the shoulder strap from the unit before taking off the shoulder strap.
• Never use a dull blade. If the blade becomes dull, refer to Maintaining the Blade in the Maintenance
section.
WARNING:
avoid serious personal injury, do not touch a coasting blade.
WARNING:
debris from the unit. Allow the blade to come to a complete stop.
WARNING:
before cleaning or maintaining the unit. Never perform cleaning or maintenance while the
unit is running. Disconnect the spark plug wire to prevent the unit from starting accidentally.
WARNING:
serious personal injury.

MAINTENANCE SCHEDULE

Perform these required maintenance procedures at the frequency stated in the table. These
procedures should also be a part of any seasonal tune-up.
NOTE: Some maintenance procedures may require special tools or skills. If you are unsure about
these procedures, take the unit to an authorized service dealer. Call 1-855-971-1123 for more
information.
NOTE: Maintenance, replacement, or repair of the emission control devices and system may be
performed by an authorized service dealer. Call 1-855-971-1123 for more information.
NOTE: Please read the California/EPA statement that came with the unit for a complete listing of
terms and coverage for the emissions control devices, such as the spark arrestor, muffler,
carburetor, etc.
FREQUENCY
Every 10 hours
After the first 10 hours,
at 50 hours, and at 100
hours
The blade will continue to spin for a while after the unit is turned off. To
To avoid serious personal injury, always turn the unit off before removing

MAINTENANCE

To avoid serious personal injury, always stop the engine and allow it to cool
Wear protective clothing and observe all safety instructions to prevent
MAINTENANCE REQUIRED
• Clean and re-oil the air filter. Refer to Maintaining the Air Filter.
• Check the spark plug condition and gap. Refer to Maintaining the
Spark Plug.
23