DeWalt DXGST227BC Manuel Del Operador página 13

WARNING:
into the primary hole and the knob is securely tightened.
WARNING:
the primary hole only. Using the wrong hole could lead to personal injury or damage to the
unit.
Removing the Attachment
1. Set the unit on a flat, level surface.
2. Turn the knob counterclockwise to loosen the coupler (Fig. 1).
3. Press and hold the release button (Fig. 3).
4. Pull the attachment straight out of the coupler (Fig. 2).
Tighten
Before operating the unit, make sure the release button is fully snapped
Unless specified otherwise, the release button should be snapped into
Coupler
Loosen
Fig. 1
Attachment
Fig. 2
13
Knob