Screen For Real-Time Ecg Waveform (Optional) - Gima 35132 Manual De Uso

Note: 1. If the device is re-started, the data in recent list data area will be cleared.
2. Invalided value will be display as "--"
Key Operation instruction:
Short pressing display view "
Ø
Long pressing display view "
Ø
For monitor without ECG function, hold Auxiliary key "
Ø
doing this it can lock / unlock key operation. For monitor with ECG function, hold ECG lead key "
firstly, then press NIBP setup key "
Note: This function is available in any screen view, we will not cover it again in the following.
Short pressing print key "
Ø
Menu→System→Print" if the printer is installed.
The following operation is also for the monitor with ECG function.
Pressing OK "
Ø
Short pressing Lead "
Ø
Short pressing Up/Down("
Ø
Note: there are 7 screen views (depending on your configuration): default screen, screen for real-time ECG
waveform only, NIBP list screen, SpO
waveform recall. The following sections will describe each one of these 7 screens.

4.3 Screen for Real-time ECG waveform (Optional)

Note: this screen is only for the monitor with ECG function.
Real-time ECG waveform screen is as shown in figure 4.3.
"II": ECG lead.
²
"X2": ECG waveform gain.
²
Operating instructions:
Pressing OK "
Ø
User Manual for Vital Signs Monitor
" key to shift screen views.
" key to enter into Menu setup screen.
", by doing this it can lock / unlock key operation
" to activate printing with the format specified by "Setup
" key to freeze / unfreeze ECG waveform.
" key to shift the ECG lead.
" / " " ) key to change ECG waveform gain.
data list screen, alarm event list screen, screen for graphic trend and ECG
2
Figure 4.3 Real-time ECG waveform screen
" key to freeze / unfreeze ECG waveform.
" firstly, then press NIBP setup key "
29
", by
"
ECG waveform