Gima 35132 Manual De Uso página 96

2 " ": Power button: Long pressing power button to start or shut off the monitor; Short pressing to
enter into or exit from power saving mode.
3 ～ : AC Power indicator.
4 : DC Power indicator.
Description to AC, DC Power indicator：
AC Power indicator
ON
OFF
Status
ON
5 SpO : SpO sensor connector
2 2
6 NIBP: NIBP hose connector
7 TEMP: TEMP probe connector (optional)
8 " "NIBP Setup key: A shortcut key to change NIBP measuring mode and cycle time for Auto mode.
9 " "Auxiliary key: Holding this key and NIBP setup key (8) to lock or un-lock key operation. Short
pressing this key can also enter into or exit from "Power Saving Mode".
10 " " Alarm silence key.
11 " " Print.
12 " " NIBP Operation key: Press it to start/cancel NIBP measurement.
13 " " Up: Shift cursor forward/upward.
14 " " OK: When in setting menu, press it to confirm selection or modification; On history record
screen, long pressing this key, then a deleting dialog pops up; On monitoring screen, short pressing to
freeze/unfreeze ECG waveform.
15 " "Down: Shift cursor backward/downward.
16 " " Display View key: Short pressing to shift LCD display views or return to the upper level screen;
long pressing to enter into root setting menu display screen.
17 " ": LCD panel
Note: 1). " ": Type BF Applied Part with Defibrillation-proof
2). Long pressing means press and hold for 2 seconds.
3) BP value can be displayed in two units, "×××" mmHg" or "××.×" kPa, refer to section "4.7.2 NIBP
Setup" to set the display unit of BP value. The conversion between two units is: 1kPa=7.5mmHg,
1mmHg=0.133kPa.
User Manual for Vital Signs Monitor
Yellow light Low priority alarm
Green light Normal
DC Power indicator
ON
ON
OFF
Descriptions
this device is on and using AC power supply
the device is on and using built-in battery
the device is off and battery is being
charged while the AC power is connected.
5