Basic Safety Rules - VITO AGRO Manual De Instrucciones

EN
Choke: Set the choke knob (A) in
the choke position. If you restart a
warm engine, don't need to operate
the choke knob.
WARNING
The choke will automatically return
to the run position by operating
the throttle trigger. If you manually
turn the choke knob from choke
position to run position, the cutting
attachment will start to rotate
immediately when the engine is
started.
Hold the body of the machine on
the ground using your left hand
(CAUTION! Not with your foot!).
Grip the starter handle, slowly pull
out the cord with your right hand
until you feel some resistance (the
starter pawls grip), now quickly and
powerfully pull the cord. Never twist
the starter cord around your hand.
Repeat pulling the cord until engine
firing occur, then operate the
throttle to allow the choke return
to the run position. Repeat pulling
the cord until engine start. When
the engine starts, allow the engine
to warm up with the throttle pulled
slightly.
48
CAUTION! Do not pull the starter
cord all the way out and do not let
go of the starter handle when the
cord is fully extended. This can
damage the machine.
CAUTION! Do not put any part of
your body in marked area. Contact
can result in burns to the skin, or
electrical shock if the spark plug
cap has been damaged. Always use
gloves. Do not use a machine with
damaged spark plug cap.
STOPPING
Stop the engine by switching off the
ignition.
GENERAL WORKING
INSTRUCTIONS
IMPORTANT!
This section describes the basic
safety precautions for working with
brush cutters and trimmers.
If you encounter a situation where
you are uncertain how to proceed you
should ask an expert. Contact your
dealer or your service workshop.
Avoid all usage which you consider to
be beyond your capability.
You must understand the difference
between forestry clearing, grass
clearing and grass trimming before use.

BASIC SAFETY RULES

1 - Look around you:
a) To ensure that people, animals
or other things cannot affect your
control of the machine.
b) To ensure that people, animals,
etc., do not come into contact with
the cutting attachment or loose
objects that are thrown out by the
cutting attachment.
CAUTION!
c) Do not use the machine unless
you are able to call for help in the
event of an accident.
2 - Inspect the working area. Remove
all loose objects, such as stones,
broken glass, nails, steel wire, string,
etc. that could be thrown out or
become wrapped around the cutting
attachment.
3 - Do not use the machine in bad
weather, such as dense fog, heavy rain,
strong wind, intense cold, etc. Working
in bad weather is tiring and often
brings added risks, such as icy ground,
unpredictable felling direction, etc.
4 - Make sure you can move and stand
safely. Check the area around you
for possible obstacles (roots, rocks,
branches, ditches, etc.) in case you
have to move suddenly. Take great care
when working on sloping ground.