CAMPAGNOLA SUPER STAR SF Manual De Utilización Y Mantenimiento página 14

Specifications
• Handgrip diameter ................................................................................................. 48 mm
• Cutting diameter .................................................................................................... 32 mm
• Working pressure: ............................................................................... 1000 kPa (10 bar)
• Max. air consumption ....................................................................................... Nl/min 0.9
• Weight .............................................................................................................. 600 grams
Controls
• Control lever (6): gently press the control lever to make the shear cut.
• Safety catch (7): it is automatically on as soon as the control lever (6) is released.
WARNING: Always check the perfect functioning of the safety devices.
Air connections
• Make sure the safety catch (7) is on.
• Set the compressor to a pressure of 10 bar.
• Screw on a 1/4" quick coupling (11).
• Check the air hose for the presence of dirt or impurities and then connect it.
WARNING: All the maintenance operations which are not described in the
manual must be carried out by an authorized service shop.
WARNING: Pay attention to parts with sharp cutting edges. For any interven-
tion, use adequate gloves.
General
Before performing any maintenance:
• The safety catch (7) must be on.
• Disconnect the air hose.
Adjusting the blades
• Unscrew the nut (14).
• Screw the pin (15) (not too tight).
• Screw the nut (14) tight again.
Sharpening the mobile blade
• Only the cutting edge of the mobile blade (16) is to be sharpened every 2 working hours
using the proper stone; sharpening angle: 45°.
Lubrication
• Every 20 hours, pour a drop of oil on the rivet (17) of the link (18).
Cleaning the blades
• Dip the blades (3) (until the pin is covered) into a mixture of 50% oil and 50% diesel fuel
at the end of the work day. This will avoid deposits due to the wood moisture.
OPERATION
MAINTENANCE
11 - 40