CAMPAGNOLA SUPER STAR SF Manual De Utilización Y Mantenimiento página 13

The following obligations have to be fulfilled:
• The operator shall undergo a periodic check up.
• The operator must be informed of the risks faced caused by exposure to high
noise levels.
• Safe and adequate sound barriers or other hearing protection must be used.
2) VIBRATIONS LEVEL
Average weighted hand-transmitted vibration value, in frequency, the user is ex-
posed to measured in compliance with EN ISO 5349/1-2:
Direct shear
Shear with 0.5 m fixed length extension pole
Shear with 1.85 ÷ 3.15 m telescopic extension pole in fibreglass
Shear with 1.25 ÷ 1.95 m telescopic extension pole in aluminium a
Shears with telescopic extension poles of various lengths
The resulting values, according to the auxiliary tools which have been used, have
turned out to be high, since they overcome the reference limit of 2.5 m/s
The following obligations have to be fulfilled:
• The operator shall undergo a periodic check up.
• The operator shall be informed about the vibrations risks.
• The tool can be used continuously no more than 6 hours per day.
Product Description
The pneumatic shears with a single cutting blade are specifically fit for pruning orchards.
The air cylinder inside the handle (1) provides the cutting power required. A lever (6) on
the handle (1) makes it work. When releasing the lever (6), the safety catch (7) is auto-
matically on.
Manual safety catch to be used for extended break from work.
• Mod. Super Star SF indicated for fruit trees (one sharp blade).
• Mod. Super Star SV indicated for vineyards (one sharp blade) (32).
• Mod. Super Star SDT indicated for fruit trees in general (two sharp blades ) (33).
WARNING! Do not use the shears to cut material other than that specified
above as they may be severely damaged and cause injury to the operator.
Main features of the shears
• Pneumatic working.
• Ergonomic handgrip (1).
• Ergonomic control lever (6).
• Finger guard (5).
• Hardened steel blades (3).
• Manual safety catch (9).
• Automatic safety catch (7).
• Possible connection to extensions (28).
10 - 40
DESCRIPTION
a = 5.06 m/s
2
heq
a = 3.95 m/s
2
heq
a = 2.80 m/s
2
heq
= 2.80 m/s
2
heq
a = <2.50 m/s
2
heq
.
2