Blackmagic Design Cintel Manual De Instalación Y Funcionamiento página 60

Cleaning the Audio and KeyKode Reader's Magnetic Audio Head
You may wish to occasionally clean the Audio and KeyKode Reader's magnetic head. To clean
the magnetic head, remove the top cover of the reader by removing the 4 x M3 screws with a
2.5mm Allen key.
Remove the Audio and KeyKode Reader's upper cover to access the magnetic head
With the magnetic head exposed, simply dip a Q-tip in water and shake off any excess, then
gently brush the magnetic head surface to remove dust. Allow the head to dry for a few minutes
before reinstalling the reader's upper cover.
The magnetic head is demagnetized at the factory and shouldn't need additional
demagnetization.
Spare Parts for your Cintel Scanner
Spares of major Cintel scanner components are available through your local
Blackmagic Design support office. Servicing your Cintel Scanner is generally quite
easy and intuitive, but if required, documentation can be provided from your local
sales office to assist.
Servicing 60