Philips Cucina HR7638 Instrucciones De Uso página 7

Never use any accessories or parts from
other manufacturers or that have not been
specifically advised by Philips. Your guarantee
will become invalid if such accessories or
parts have been used.
Do not use the appliance if the mains cord,
the plug or other parts are damaged.
If the mains cord is damaged, it must be
replaced by Philips, a service centre
authorised by Philips or similarly qualified
persons in order to avoid a hazard.
Thoroughly clean the parts that will come
into contact with food before you use the
appliance for the first time.
Do not exceed the quantities and preparation
times indicated in the tables and recipes.
Do not exceed the maximum content
indicated on the bowl or the blender jar, i.e.
do not fill beyond the top graduation.
Unplug the appliance immediately after use.
Never use your fingers or an object (e.g. a
spatula) to push ingredients down the feed
tube while the appliance is running. Only the
pusher is to be used for this purpose.
Always unplug the appliance before reaching
into the blender jar with your fingers or an
object (e.g. a spatula).
Keep the appliance out of the reach of
children.
Never let the appliance run unattended.
Never switch the appliance off by turning the
lid. Always switch the appliance off by
pressing the PULSE / 0 button.
Switch the appliance off before detaching any
accessory.
Never immerse the motor unit in water or
any other fluid, nor rinse it under the tap. Use
only a moist cloth to clean the motor unit.
When you mount the blender jar, the bowl
and the screw cap in the proper way, you will
hear a click.
The emulsifying disc, the blade and the
kneading accessory have to be placed on the
toolholder that stands in the bowl.
Remove the protective cover from the blade
before use.
Avoid touching the SHARP cutting edges of
the blades and inserts, especially when the
appliance is plugged in.
If one of the blades get stuck, unplug the
appliance before removing the ingredients
that are blocking the blades.
Let hot ingredients cool down before
processing them (max. temperature
80cC/175cF).
If you are processing a liquid that tends to
foam, do not put more than 1 litre into the
blender jar to avoid spillage.
Note that if both the blender and the bowl have
been correctly mounted, only the blender will
function.
ENGLISH
7