Introduction, English - Bang & Olufsen BeoVision 1 Guía De Servicio

2.2

Introduction, English

STATIC ELECTRICITY
MAY DESTROY THE
PRODUCT
#1 Introduction
Warning
Static electricity may destroy the product!
A static-protective field service kit must always be used when replacecement of
the modules takes place. Follow the instructions in the guide and use the ESD
mat area for both the new and old modules.
Please note:
When mains voltage on the TV is required, remove the connection from the TV
to the ESD mat.
This On-site service guide explains how to service the BeoVision 1 by replacing
the modules. In the following you will find repair tips, description of how to
replace the different parts and a description of how to adjust after servicing.
When the following symbol occurs;
illustration in the back of this On-site service guide.
For example; ..the two screws A (see
the screws marked with an A at the photo/illustration called
The chapters in the On-site service guide are named for example #2 Repair of
BeoVision 1. They are listed numerically.
Please note:
This On-Site Service guide must always be returned with the defective parts.
it is a cross-reference to a photo or an
2). This would refer to the placement of
2.