#14 Removal of the cloth front
Remove the cloth front
Mount the cloth front
#15 Removal of the contrast screen and cleaning the BeoVision 1
Remove the contrast screen
Mount the contrast screen
Clean the picture tube and the contrast screen
Clean the product
- Use the white gloves to avoid smudging the cloth front. Remove the cloth front
by carefully pulling out at each corner and at the same time pull it downwards
(see
19).
- Use the white gloves to avoid smudging the cloth front. Reinstall the cloth front,
by holding it at the corners, and then push it towards the TV and upwards. You
can easily feel if the cloth front is not in the right place.
- Use the white gloves to avoid smudging the contrast screen. Turn the screws
(O + P) below the glass 90° in each direction (see
please note that the contrast screen will fall outwards, but it will not fall off
(see
21). Remove the contrast screen by holding it up straight onto the TV and
then pull it outwards a bit at the lower righthand corner and the top lefthand
corner.
- Use the white gloves to avoid smudging the contrast screen. Check that the
picture tube and the inside of the contrast screen is clean. See cleaning the
picture tube and the contrast screen for more information. Mount the glass by
holding it at the lower righthand corner and the upper lefthand corner onto the TV.
While holding it, push the right screw (P) up. Then push in the glass in the lower
lefthand corner, and push up the left screw (O). Fasten the screws (see
- To clean the picture tube and the contrast screen use a mild window cleaning
fluid. Make sure no streaks or traces of the cleaning fluid are left on the screen.
- Wipe dust of the surfaces of the BeoVision 1 using a dry, soft cloth. If necassery,
remove grease stains or more persistent dirt with a firmly wrung lint-free cloth
which you have dipped in a solution of water containing a few drops of a mild
detergent.
Replacement, English
20). Pull down each screw,
20).
2.19