H
6.
ow do you use the timer?
Your oven is equipped with an electronic timer that is independent of
the oven functions, making it possible to measure times.
Press the "
Press on the (
length of time is displayed (12:00 maximum)
Example: 25 minutes.
The setting advances by 10-second intervals until 19:30,
at which point the setting begins advancing in one-
minute intervals.
The display shows minutes and seconds from 00:00 to 19:30.
Example: 19:30 equals 19 minutes and 30 seconds.
The display shows hours and minutes beginning at 20 minutes:
Example: 00:20 equals 0 hours and 20 minutes.
The beeps can be stopped by pressing the
- If there is no programme under way, the digital display turns off.
- If a cooking cycle has been programmed, the remaining cooking time will
appear in the digital display.
- If a scheduled cooking programme ends before the timer goes off, a
series of beeps is emitted for three minutes to indicate the end of cooking.
Press the
indicates the time remaining on the timer countdown.
The display stops flashing after a few seconds, the timer starts counting down.
Once the time has expired, the timer emits a series of beeps for 30 seconds to
notify you.
It is possible to change or cancel the timer programme at any
time.
10
" touch control until the "
or
) touch control until the desired
or
touch controls to stop the beeps. The digital display
How does your oven work?
" display begins flashing.
or
touch controls.