Remove The Trimmer Head - EGO ST1530 Manual Del Operador

Remove the trimmer head

1. Remove the battery.
2. Press the two release tabs on the
spool retainer to remove the spool
retainer (see Figs. 15 & 16).
3. Pull the spring out of the spool base
(Fig. 20).
4. Rotate the spool base to align the
slot in the flange with the hole in the
gear case (Fig. 21).
5. Insert the hex wrench provided
into the aligned holes to act as a
stabilizer (Fig. 22). Use the multi-
function wrench provided to loosen
the nut in the direction of the arrow
marked on the inside housing of the
spool base and remove it (Fig. 23).
26
56-VOLT LITHIUM-ION CORDLESS 15" BRUSHLESS STRING TRIMMER — ST1530/ST1530-FC
20
Spool Base
21
Gear Case
22
23
Arrow
Nut
Spring
Aligned Shaft-locking Holes
Spool Base
Stabilizer
Multi-function
Wrench Provided