Mounting The Guard - EGO Power+ ST1210E Manual Del Usuario

MOUNTING THE GUARD

EN
WARNING:
Always wear gloves when mounting or replacing the guard. Take
care of the blade on the guard and protect your hand from cutting.
1. Remove the battery pack from
the trimmer.
2. Position your trimmer so that the
trimmer head faces up.
3. Loosen and remove the two screws
from the motor housing with a
Phillips screwdriver (available
separately) (Fig. 1).
4. Align the ribs of the guard with the
guide slots in the motor housing and
push the guard in place (Fig. 2).
5. Lock the guard with two screws
(Fig. 3).
14
56V LITHIUM-ION CORDLESS STRING TRIMMER — ST1210E
1
2
3
MOUNTING AND ADJUSTING THE FRONT-ASSIST HANDLE
WARNING:
Always remove battery the pack from the product when you are
assembling parts, making adjustments, cleaning, or when the product is not in use.
1. Remove the battery pack from the trimmer.
2. Loose the wing nut by hand
and remove the wing nut,
lock pole, clamping block from the
handle (Fig. 4).
3. Align the slot of the front-assist
handle with the shaft, and push the
handle in place, as shown in Fig. 5.
WARNING:
Only fix the front-assist
handle in front of the soft sleeve on the
shaft.
4. Insert the clamping block into the
slot of the front-assist handle, and
push it in place, as shown in Fig. 6.
56V LITHIUM-ION CORDLESS STRING TRIMMER — ST1210E
4
Front-Assist Handle
Lock Pole
Clamping
Block
Wing Nut
5
6
15
EN