Free-Standing Set-Up; Connection/Disconnection - Medion LIFE E69644 Manual De Instrucciones

 Drill 4 holes on the underside of the shelf unit (where you made your markings)
in order to fix the screws.
 Screw the mounting bracket directly to the bottom of the cupboard or shelf.
 Now place the device onto the mounting bracket retaining pins and carefully
push the device back until it audibly clicks into place.
ATTENTION!
Never mount the unit above a cooker or any other heat or steam source.
Never allow the mains cable to hang over a heat source.

Free-standing set-up

Instead of mounting the device on a cupboard/shelf, you can also put it on a table
or a cupboard without having to fix it permanently into place.

Connection/disconnection

 To start up the device, connect the supplied mains adapter to the mains power
socket at the back of the device.
CAUTION!
Use only the mains adapter supplied with your device (type Hinston Elec-
tronics Co. LTD., model: HEAD0902000 VDE
 Plug the mains plug into a 230 V ~ 50 Hz mains socket.
NOTE
When you connect the device for the first time, the message "PLEASE
WAIT FOR SETTING THANKS" will appear in the display. An automatic up-
date function starts within 3–5 minutes. As soon as a signal is received,
the current time will be shown in the display.
If the automatic update is interrupted, default information is temporarily stored:
− Sunday, 01.01.2012, 00:00.
− Alarm: 0:00.
− Automatic display dim function: 23:00 to 05:59.
Device on/off
 Press the
button to switch on the device.
 Press the
button again to switch off the device.
).
ES
EN
DE
PL
15