Changing A Stored Number; Storing A Chain Of Numbers - GE 29485 Guia Del Usuario

6. Repeat steps 1-5 for any additional numbers you want to store, up to a
total of 16.
7. To cancel the storing procedure at any time, press STORE twice or place
the handset on the cradle.
NOTE: The storage procedure will automatically cancel after 15 seconds if no
keys are pressed. Also, when pulse mode is used, pressing the TONE " * '' key
before programming will store all digits in tone.
C S
HANGING A
If you want to change the stored number, simply enter the new number
over the old number using the previous memory storing procedure. To
erase a stored number, press STORE twice, then the memory location you
want to erase.
S C
TORING A HAIN OF
You can link together a dialing sequence of phone numbers in separate
memory locations by combining them in a single memory location or have
another memory location stored in one of the locations to be linked.
For example
Local access number of long distance company.
Authorization code (ID).
Where entire sequence is to be stored
including long distance phone number.
Storing
1. Press STORE.
2. Press memory location 6.
3. Press REDIAL (PAUSE).
4. Press memory location 7.
5. Press REDIAL (PAUSE).
6. Enter long distance number.
7. Press STORE.
N
TORED UMBER
N
UMBERS
Memory Location
6
7
8
21