have sufficient load capacity.
The slings are correctly positioned in the lifting lugs provided or the fork lift arms
are positioned centrally under the frame.
Never use the engine lifting eyes or the generator lifting eyes instead of the base
frame lifting eyes or the enclosure lifting eyes to lift the entire generator set.
The ground is able to withstand the weight of the generator set and the hoisting
device.
1.7 Exhaust Gases Protection
Engine exhaust gases contain deadly carbon monoxide gas which is colorless
and odorless. If breathed in sufficient concentrations, this gas can cause severe
nausea, fainting or death. Provide adequate ventilation to prevent buildup of exhaust
gases.
When the generator is installed inside a room or enclosure, exhaust gases must
be piped outdoors.
Never connect the exhaust system of two or more engines.
Make certain that the exhaust is not near the air inlet.
Increase the exhaust pipe diameter as necessary to reduce back pressure.
1.8 First Aid for Electric Shock
In the event of an accident from electrical shock, shut down the generator set
immediately. If the set cannot be shut down, free the victim from contact with a dry
nonconductor, avoiding direct contact with victim until free of the conductor. If the
victim is unconscious, apply artificial respiration and get medical help immediately.
1.9 Precautions before Starting
Make a general visual inspection on generator set if there is any breakage, crack,
indentation, leakage or looseness. Never operate the generator set before solving
faults.
Take out foreign materials such as keys, tools, cleaning wool, papers etc. in the
engine and the alternator.
Check the fuel level in base fuel tank. Refuel if it is low.
Check the oil level on the dipstick. Refill with oil if it is low. The oil level generally
must be close to the maximum level line.
Check the water level by removing the radiator tap. Add water if it is low.
Engine coolant may include antifreeze according to the coldest weather
conditions. We recommends a 1:1 mixture of water and glycol. This mixture will
provide optimum heavy-duty performance as a coolant/antifreeze.
Inspect the radiator air outlet hood. If it is clogged, open and clear away all
obstructions.
Check the air filter gauge. If necessary, clean or replace the air filter.
Keep the air inlet open.
Make certain that the generator set can take air easily from the environment.
Check the battery connection cables. Be careful to tighten the loosened battery
terminals with spanner and keep clean.
Check if the circuit breaker switch is in OFF position.
10