Control System; Operation - TOYAMA TDMG25 Guia Del Propietario

2.7 Mute Cabinet
Super Silent Diesel Genset owns significantly low noise performance. The noise
is limited to 63 dB (seven meters away from set). The silent cabinet is made of 2.5mm
thick cold rolled steel sheet and 5cm thick sound-absorbing sponge. Hoisting on the
top of silent cabinet is available.
2.8 Silencer
The silencer and exhaust system reduce the noise emission from the engine.
Exhaust gases are discharged into atmosphere through a silencer. Rain proof and
condensation proof equipment shall be provided to prevent water entering the silencer
and the engine. The silencer is made of carbon steel and supplied with industrial or
residential type.

2.9 Control System

The control systems and panels are used for controlling the operation and output
of the set, and protecting the set from possible malfunctions. Due to individual
applications, the control systems and wiring are different. Refer to the electrical wiring
diagrams of the end of this manual, or specific control manuals and wiring diagrams.
Please contact us if you have any doubts.

3. OPERATION

3.1 Receipt of the Genset
When you receive the generator set, check the generator set whether it is in good
condition or not and all equipments are given or mounted. If the generator set is not
installed immediately, store the generator in a clean, dry and vibration-free area.
If you find any missing or broken parts, contact us.
If the generator set is received during cold weather, allow the unit to reach room
temperature before removing the protective material.
If you remove the protective material before the unit reaching room temperature, the
water may condense on cold surfaces. It may cause early failures due to wet
windings and insulating materials.
3.2 Product Lifting
In order to ensure personal safety and prevent damage to the product when you
lifting generator sets, we strongly recommend the guidelines:
◆
The hoisting devices are appropriate for the required tasks.
◆
The slings are correctly positioned in the lifting lugs provided or the fork lift arms
are positioned centrally under the frame.
◆
The ground is able to withstand the weight of the generator set and the hoisting
device.
NOTICE
WARNING
WARNING
15